Profile Dimension

With the zinc coating and yield strength conforming to JIS G3302 / AS 1397, Asteel Galvanised C-Lipped Channel ensure long service life, strong and will not warp, crack or sag. Commonly use as support for roofing & wall cladding. dimension


Material Used: Hot Dipped Galvanised Steel Standard: JIS G3302 / AS 1397 Available Thickness (mm): 1.0, 1.2, 1.6, 2.0, 2.5 Yield Strength: Min 550 Mpa for thickness 1.0 & 1.2. Min 450 Mpa for thickness 1.6, 2.0, 2.5 table


There are 2 types of elongated hole for customer selection. Recommendation of hole type shall refer to your requirement. holing01 holing02

Galvanised C-Lipped Channel Full Section Properties



Galvanised C-Lipped Channel should be kept under shed or wrapped under plastic sheets well ventilated and clear form ground to avoid moisture contact. Always keep the Galvanised C-Lipped Channel at a slanting angle to let water run off. Do not get in contact with chemicals, dirt, oil based liquids and corrosive vapours.  
Please do not hesitate to contact ASTEEL Team if you have any further questions. Click Here!